In the countries of the world, where there is right -way movement, as a rule, they install mirrors for the rear vision in the salons of cars. Sometimes some drivers completely abandon the right side mirror, because they have enough for a review and left mirror. But this is wrong due to the fact that it is impossible to see the right side of the car and road in the left mirror, which means that, thus, the review is actually halved. But if there is an internal mirror in the cabin, you need to adjust the side mirrors. The landing and direction of the head must be kept as when setting up without an internal mirror. However, turn the mirror slowly to capture the moment when the wing of your car disappears from the review. On the same principle, the mirror on the right side is configured. You may have a question why the bumper of the back of the car is left, and after these changes it is not completely visible. The fact is that the side mirrors are combined with the inner rear -view mirror for a complete review of the situation for the car. It is also important that the objects do not duplicate, since then the driver reacts incorrectly. The setting is carried out very accurately, in order to avoid duplication or exclusion of “blind zones” in the review of the driver. Mirror for the rear view in the car becomes “bearing”.You need to configure such mirrors. If you configure correctly, the middle of the rear window will directly affect the reflection of the mirror. The edges of their car are included in the overview of the lateral mirrors, so it will be easy to determine the position of other cars and objects in relation to your machine. Remember that the minimum review is two meters from the sides. If this is not, then the viewing angle will be small to fully control the situation on the road. Remember also that the horizon line runs slightly below the middle of the side mirrors. You shouldn’t look under the wheels. How to check the correct settings. You can ask one of your friends a little walk about two meters around the car, while watching the rear view mirror behind him. If everything is true, a person, having left the reflection in the right side glass, appears in the rear view mirror in the cabin. Check “Dead Zones” in the review. If there is such a zone, then during this check, a person temporarily falls out of the review, not immediately moving into a reflection on another mirror. Sometimes adjust the inaccuracies of the view, slightly tilting your head or body in a certain direction, catching the desired angle, tracking previously inaccessible zones.
